Changes between Version 1 and Version 2 of BuildingAPC


Ignore:
Timestamp:
May 12, 2011, 7:07:58 PM (14 years ago)
Author:
edison
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • BuildingAPC

    v1 v2  
    11= Building a Control PC for Barrett products =
     2
     3== General Configuration ==
    24
    35You should choose an operating system based on the type of PC hardware you have. The [http://web.barrett.com/supportFiles/wikiFiles/sk43g.jpg Shuttle PC] and the [http://web.barrett.com/supportFiles/wikiFiles/c137.jpg Travla C137 PC] shipped with either a Janz or esd CAN card. Newer WAMs with embedded PCs ship with a Peak CAN card. If you are ambitious, you can use your own PC and CAN card.
    … …  
    1113
    1214  * SoftwareUpdate - Update instructions to get the latest copy of the Barrett control software (btclient)
     15
     16== BarrettHand PC Requirements ==
     17The BH8-SERIES control software was written for computers running Windows XP or Ubuntu 9.10.  The !BarrettHand Control GUI requires a good amount of CPU power and memory for running this wxWidgets based application.  Barrett Technology requires the minimum specs for using the corresponding operating system.  A processor with a CPU clock speed of 1 GHz or greater, 1 GB of RAM, at least a Gigabyte of free disk space, and a modern graphics card is recommended.  Communications requires either one available USB port for the Peak USB to CAN adapter for the BH8-280 hand or a 9-pin serial port for BH8-262 hand.