Changes between Version 4 and Version 5 of WAM/FirmwareUpdate/DetailedSafetyBoardInstructions

Timestamp:

Jul 10, 2012, 12:56:16 PM (12 years ago)

Author:

bz

Comment:

--

WAM/FirmwareUpdate/DetailedSafetyBoardInstructions

@@ -27 +27 @@
 If your system matches type '''WAM-xD''', wait for further instructions.
 
-If your system matches type '''WAM-xE''', connect the [http://web.barrett.com/supportFiles/wikiFiles/wam-PuckSerialCable.jpg serial cable] to the connector near the safety puck and [http://wiki.barrett.com/support/attachment/wiki/SafetyFirmwareUpdate/RevAE-download.jpg flip the nearby switch] to the "ON" position (toward the puck).
+If your system matches type '''WAM-xE''', connect the [http://web.barrett.com/supportFiles/wikiFiles/wam-PuckSerialCable.jpg serial cable] to the connector near the safety puck and [http://web.barrett.com/supportFiles/wikiFiles/RevAE-download.jpg flip the nearby switch] to the "ON" position (toward the puck).
 
 == Step 2: Set Up the Computer ==
@@ -53 +53 @@
 If your system matches type '''WAM-xD''', wait for further instructions.
 
-If your system matches type '''WAM-xE''', [http://wiki.barrett.com/support/attachment/wiki/SafetyFirmwareUpdate/RevAE-download.jpg flip the nearby switch] to the "OFF" position (away from the puck).
+If your system matches type '''WAM-xE''', [http://web.barrett.com/supportFiles/wikiFiles/RevAE-download.jpg flip the nearby switch] to the "OFF" position (away from the puck).
 
 == Set Safety Firmware Defaults ==