WAM Specifications

Power Requirements

The standard WAM system requires an input voltage of 18-90VDC. The power requirements for both 4-DOF and 7-DOF WAMs are summarized in the table below. For AC operation, a converter for AC mode is supplied. The converter requires 50-60 Hz single-phase 100-120 VAC @ 7A or 200-240 VAC @ 3.5A for proper operation

DC Power Requirements

Status	Control	4-DOF	7-DOF
Powered on, no torques	External	18 W	27 W
Active at home position	External	30 W	40 W
Active at worst-case position, 4kg payload	External	65 W	XXX
Active at worst-case position, 3kg payload	External	XXX	80 W
Active at worst-case position, 3kg payload	Internal	XXX	85 W
Active at worst-case position with BH8-280, 2kg payload	Internal	XXX	120 W
Peak	External	600 W	800 W